3F Zeta DT UGR
Code 10612
L<3000 cd/m² 65°
ON/OFF electronic wiring 230V‑50/60Hz
Code
Item
W
lm
K
CRI
L x A x H
IP
10612
3F Zeta DT UGR 2x22 LED L1783
49
6534
4000
>80
1783x118x95
40
10613
3F Zeta DT UGR 2x15 LED L1489
34
4409
4000
>80
1489x118x95
40
10614
3F Zeta DT UGR 2x12 LED L1194
28
3523
4000
>80
1194x118x95
40
10615
3F Zeta DT UGR 2x6 LED L605
15
1758
4000
>80
605x118x95
40
DALI electronic wiring 230V‑50/60Hz
Code
Item
W
lm
K
CRI
L x A x H
IP
10616
3F Zeta DT UGR 2x22 LED DALI L1783
49
6534
4000
>80
1783x118x95
40
10617
3F Zeta DT UGR 2x15 LED DALI L1489
34
4409
4000
>80
1489x118x95
40
10618
3F Zeta DT UGR 2x12 LED DALI L1194
28
3523
4000
>80
1194x118x95
40
10619
3F Zeta DT UGR 2x6 LED DALI L605
15
1758
4000
>80
605x118x95
40
EP maintained emergency wiring, 1hr duration with 24hrs recharge
Code
Item
W
lm
K
CRI
L x A x H
IP
10620
3F Zeta DT UGR 2x22 LED EP L1783
50
6534
4000
>80
1783x118x95
40
10621
3F Zeta DT UGR 2x15 LED EP L1489
35
4409
4000
>80
1489x118x95
40
10622
3F Zeta DT UGR 2x12 LED EP L1194
29
3523
4000
>80
1194x118x95
40
ILLUMINOTECHNICAL
Controlled symmetric distribution.
Average luminance <3000 cd/m² for radial angles >65°.
Lifetime (L80/B10): 100000 h. (tq+25°C)
Photobiological safety RG0.
SOURCE
Linear LED modules.
Colour initial tolerance (MacAdam): SDCM 3.
MECHANICAL
Housing in hot‑galvanised steel, painted in white polyester, obtained through rolling process.
Diffuser with differentiated geometry, made of transparent polycarbonate with microprismatic finish, anti‑glare on the flat part and opal on the side.
Anti‑glare opal methacrylate (PMMA) filter for brightness uniformity.
End caps in white polycarbonate.
Stainless steel mounting brackets with anti‑slip screws.
ELECTRICAL
In compliance with EN 60598‑1.
Compliance with the EN 60598‑2‑22 standard for power supply from a centralised CPSS emergency system must be verified in the technical data sheets of each individual device on our website.
The luminaires with EP permanent emergency wiring on board comply with EN 60598‑2‑22 standard, high risk areas excluded.
INSTALLATION
Ceiling, suspension or wall installation.
APPLICATIONS
Environments: with VDTs, meeting rooms, offices.
Environments: recreational, transit areas, corridors, schools, stairwells.
Environments where soft diffuse light is required for optimal visual comfort.
Suitable product for food production plants (HACCP), IFS (Food Version 6), BRC (GSFS Food Version 7).
LIGHT MANAGEMENT
The DALI products can be controlled with 3F Easy Dim or 3F Smart Dimming technology.
ON REQUEST
- different power levels, colour rendering indices and colour temperatures
- housing and accessories in different RAL colours
- wiring: CLO
- class II
- emergency versions
Code
Item
A0660
Suspension with adjustment - 1m
A0661
Suspension with adjustment - 2 m
A0662
Suspension with adjustment - 3 m
A0663
Suspension with adjustment - 4 m
A0664
Suspension with adjustment - 5 m
A0665
Suspension with adjustment - 6 m
Suspension with regulator, galvanised steel cable 1.5 mm diameter, load 15 kg.
Attention: each product requires two suspensions with regulator.Code
Item
A02562
Caddy for exposed profiles of 24 mm
Caddy hook to create a point from which to suspend the system or the loads to false ceilings with visible profiles.
To be installed on exposed profiles (width 24 mm) of false ceilings.
We recommend reinforcing the false‑ceiling fixing at the point where the Caddy is to be installed.
Supplied complete with nut and washer.
The suspension must be purchased separately.Code
Item
A20452
Stainless steel hook for chain
Hook to suspended luminaires to a chain.
Code
Item
A20433
Linear connecting element
Element to connect in hot‑galvanised steel.
Code
Item
A0716
Coil galv. cable diam. 1.5mm - 100m
The pack contains 100 metres.A0717
Coil galv. cable diam. 1.5mm - 500m
The pack contains 500 metres.A0718
Coil galv. cable diam. 1.5mm - 1000m
The pack contains 1000 metres.Galvanised steel cable, diameter 1.5 mm, composed of 49 wires.
15 kg capacity (ratio 5:1).
Code
Item
A0714
Clamp 2 holes susp.- 100 pcs
The pack contains 100 pieces.Clamp in nickel‑plated brass suitable for fixing and adjustment of galvanised steel wire (diameter 1,25 mm 1,5 mm ‑ 2 mm), complete with locking screws.
The 2 hole clamp allows to block and adjust the cable on a bearing element (part of the building) or on rounded eye bolt.
Code
Item
A0659
Adjustable clamp 2 holes - 10 pcs
The pack contains 10 pieces.Clamp suitable for fixing and adjustment of galvanised steel wire (diameter 1.5 mm), with quick adjustment through unlock buttons.
The clamp with 2 holes allow to fix and adjust the cable on the carrier structural element (belonging to the building) or with eye screw fixing.
Code
Item
A20478
Anti-slip term. incli. 3F Linux
Safety bracket in white painted steel to secure lighting elements if installed vertically.
This accessory must ALWAYS be used with code A20448.Wall‑mounting bracket, in white painted steel.
Code
Item
A0679
5 pole rectangular rose (no cable) WH
Electric supply with white polycarbonate case, internal bracket in galvanised steel.
