3F Linux S IP54
All product codes include the support structure and cover element.
In the L3556 versions there is also an IP54 element that is used to protect the joins between the covers.
A20726
3F Linux 5P IP54 L1778 System
1778x64x72
54
A20724
3F Linux 7P IP54 L1778 System
1778x64x72
54
A20725
3F Linux 5P IP54 L3556 System
3556x64x72
54
A20723
3F Linux 7P IP54 L3556 System
3556x64x72
54
This fixture makes it possible to create light channels with IP54 protection.
MECHANICAL
Hot‑galvanised wired structure, painted in polyester base white, obtained through rolling process, with expanded EPDM rubber profiles.
Linear connecting element in hot galvanised steel with gasket for the formation of continuous channels, standard on L3556 versions (optional for other lengths).
Transparent polycarbonate IP54 cover element with methacrylate (PMMA) flexible parts.
The L3556 versions have a locking collar for joining the covers.
For the completion accessories see accessories.
ELECTRICAL
Supporting structure with 5 or 7‑pole through power supply lines with H07Z‑U Halogen Free cables (2.5 mm² HT90 cross‑section), equipped with quick connection start/end channel terminal blocks, non‑reversible with intermediate power sockets.
2 sockets for 3556 mm structures, 1 socket for 1778 mm structures (5P=N/T/1/2/3, 7P=N/T/1/2/3/+/‑).
Feeding input on top at the beginning of the structure or at end cap.
INSTALLATION
Ceiling mounted or suspension installation.
Attention: to obtain a light system with IP54 protection rating, it is necessary to use 3F Linux L light modules (or alternatively IP54 closing top) + closing terminals.
APPLICATIONS
Dry, dusty indoor environments, subject to occasional water splashes.
Virtually in all environments compatibly with the use of any chemicals which could compromise the use of plastic materials.
Not suitable in environments where chlorine fumes, ligroin, hydrocarbon mixtures, mineral oil vapours or fumes of lubricating emulsions to cool down machine tools are present.
Not suitable for installation on surfaces subject to important vibrations, exposed to weather conditions, on ropes or poles.
For specific applications please contact our technical offices.
Suitable product for food production plants (HACCP), IFS (Food Version 6), BRC (GSFS Food Version 7).
ON REQUEST
- structure and accessories in different RAL colours
- through‑wiring up to 11 poles
Code
Item
A20450
Slid.invis.brack.w/adj.for susp.3F Linux
Free‑position invisible sliding bracket with regulator in stainless steel.
The suspension cable must be made of galvanised steel with 49 elementary wires of minimum 1.5 mm diameter (for a weight of 15 kg) and 2 mm (for a weight of 25 kg).Code
Item
A20451
Slid.invis.brack.ceiling instal.3F Linux
Free‑position sliding bracket in stainless steel.
Code
Item
A20453
S-shaped chain hook w/slid.bra. 3F Linux
Free‑position sliding bracket in stainless steel.
Supplied with S‑hook for galvanised steel chain.Wall‑mounting bracket, in white painted steel.
Code
Item
A20474
Safety screw locking slid.bra.3F Linux S
Safety screw for locking the sliding bracket, made of hot galvanised steel.
These accessories must ALWAYS be used with one of the following codes: A20450 ‑ A20451 ‑ A20453.Code
Item
A20452
Stainless steel hook for chain
Hook to suspended luminaires to a chain.
Code
Item
A20485
Suspension without adjustment - 0.5 m
A20486
Suspension without adjustment - 1 m
A20487
Suspension without adjustment - 2 m
A20488
Suspension without adjustment - 3 m
A20489
Suspension without adjustment - 4 m
A20490
Suspension without adjustment - 5 m
A20491
Suspension without adjustment - 6 m
Suspension without controller, galvanised steel cable 1.5 mm diameter, load 15 kg.
In the case of purchase of only one sliding bracket with controller (code A20450), the suspension cable must be made of galvanised steel with 49 elementary wires of minimum 1.5 mm diameter (for a weight of 15 kg).Code
Item
A02562
Caddy for exposed profiles of 24 mm
Caddy hook to create a point from which to suspend the system or the loads to false ceilings with visible profiles.
To be installed on exposed profiles (width 24 mm) of false ceilings.
We recommend reinforcing the false‑ceiling fixing at the point where the Caddy is to be installed.
Supplied complete with nut and washer.
The suspension must be purchased separately.
This accessory must ALWAYS be used with one of the following codes: A20485 ‑ A20486 ‑ A20487 ‑ A20488 ‑ A20489 ‑ A20490 ‑ A20491.Code
Item
A0716
Coil galv. cable diam. 1.5mm - 100m
The pack contains 100 metres.A0717
Coil galv. cable diam. 1.5mm - 500m
The pack contains 500 metres.A0718
Coil galv. cable diam. 1.5mm - 1000m
The pack contains 1000 metres.Galvanised steel cable, diameter 1.5 mm, composed of 49 wires.
15 kg capacity (ratio 5:1).
These accessories must ALWAYS be used with one of the following codes: A20450, (A20452+A0714) o (A20451+A0659).Code
Item
A0714
Clamp 2 holes susp.- 100 pcs
The pack contains 100 pieces.Clamp in nickel‑plated brass suitable for fixing and adjustment of galvanised steel wire (diameter 1,25 mm 1,5 mm ‑ 2 mm), complete with locking screws.
The 2 hole clamp allows to block and adjust the cable on a bearing element (part of the building) or on rounded eye bolt.
Code
Item
A0659
Adjustable clamp 2 holes - 10 pcs
The pack contains 10 pieces.Clamp suitable for fixing and adjustment of galvanised steel wire (diameter 1.5 mm), with quick adjustment through unlock buttons.
The clamp with 2 holes allow to fix and adjust the cable on the carrier structural element (belonging to the building) or with eye screw fixing.
IP54 high closing top, with a length of 1778 mm that can be cut to 889 mm, made of impact‑resistant white PVC.
Code
Item
A20475
3F Linux Cable Support (10 pcs)
The pack contains 10 pieces.Electric cable support.
One every 50 cm is recommended.
Made of polycarbonate.
Brackets for installation of 3F Linda luminaries on 3F Linux S structures.
Made from hot‑galvanised steel.
Closing end 3F Linux S IP54, made of white polycarbonate.
IP54 end terminal with a power‑supply line entry hole.
IP54 end terminal with two power‑supply line entry holes.
Code
Item
A20454
5-pole socket-plug term.block 3F Linux S
A20455
7-pole socket-plug term.block 3F Linux S
Quick connection non‑reversible plug‑socket terminal block, for connection to the power line at the start or end of the channel.
Accessories not compatible with codes: A20011 ‑ A20012.Code
Item
A20500
Cen.pow-sup.soc-plug ter-blo.3FLinuxS 5P
A20501
Cen.pow-sup.soc-plug ter-blo.3FLinuxS 7P
Quick connection non‑reversible plug‑socket terminal block, for connection to the power line at the centre of the channel.
Accessories not compatible with codes: A20011 ‑ A20012.Code
Item
A0490
Connection to the earth
Connection to the earth, by means of galvanised M5 screw and nut, for Ø 6 mm hole at the end of every structure.
Code
Item
A0801
Electric extension with 5P plug 3F Linux S
A0802
Electric extension with 3P plug 3F Linux S
Extension cord to connect some light modules interspersed with blind covers with a length of 889 mm (contact our technical department).
Both codes are supplied with a free‑wire extension cable and a 7P 3F Linux power tower for a possible switchover.
