Yes
No
References
Search
my3F
en
Insert login and password to be identified
Remember me
Enter
Products
 | 
 | 
 | 
3F LEM Sport High Output
Models
Characteristics
Accessories
3F LEM Sport HO Medium
Code 59269
ON/OFF electronic wiring 230V‑50/60Hz
Code
Item
W
lm
K
CRI
L x A x H
IP
59125
NEW
3F LEM 2 HO SPORT LED 180 CR MEDIO
138
22128
4000
>80
470x542x129
65
59126
NEW
3F LEM 3 HO SPORT LED 210 CR MEDIO
207
33192
4000
>80
657x542x129
65
DALI electronic wiring 230V‑50/60Hz
Code
Item
W
lm
K
CRI
L x A x H
IP
59138
NEW
3F LEM 2 HO SPORT LED 180 DALI CR MEDIO
138
22128
4000
>80
470x542x129
65
59139
NEW
3F LEM 3 HO SPORT LED 210 DALI CR MEDIO
207
33192
4000
>80
657x542x129
65
ILLUMINOTECHNICAL
Wide symmetric distribution.
Lifetime (L80/B10): 100000 h. (tq+25°C)
Photobiological safety RG0.
SOURCE
Linear LED modules.
Colour initial tolerance (MacAdam): SDCM 3.
MECHANICAL
Passive modular heatsinks in die‑casted aluminium, painted in white colour.
To optimize the thermal management of the LED module, the heatsinks are oversized and provided with self‑cleaning of cooling fins.
Aluminium and galvanised steel housing painted white, specially strengthened, anchored solidly to the sinks and thermally separated.
3F Lens lenses with high luminous efficiency, transparent methacrylate (PMMA), fixed to the LED modules.
Fixing brackets in stainless steel.
ELECTRICAL
In compliance with EN 60598‑1.
Compliance with the EN 60598‑2‑22 standard for power supply from a centralised CPSS emergency system must be verified in the technical data sheets of each individual device on our website.
Quick connection in polycarbonate with M20x1,5 cable gland, to access the terminal block positioned on a removable runner.
Power unit positioned on a separate compartment by the LED module to ensure optimum temperatures of cabling components, to be inspectable and maintainable.
APPLICATIONS
Ambient temperature from ‑30°C to +55°C.
Luminaire suitable for gyms as weel as sports, commercial, exhibition and industrial environments.
Resistance against ball impacts in accordance with DIN 18032‑3.
Dry, dusty indoor environments, subject to occasional water splashes.
WARNING
Fixture not suitable for cold stores with an ambient temperature <0°C and/or relative humidity >85%.
ON REQUEST
  • different powers or colour temperatures
  • double quick connection
  • polycarbonate lenses (IK08 ‑ 5J)
  • wiring: twin‑circuit, CLO
  • linear LED modules, with special protection against aggressive chemically‑volatile substances, for standard LED technology
  • versions with anti‑condensation filter
  • emergency versions
Code
Item
A0652
Pair of brack. ceiling instal. 3F LEM
Brackets for mounting of luminaire on ceiling or on bus ducts, stainless steel.
Please note: these brackets do NOT provide free orientation of the luminaire. To allow free orientation, accessories A0651+A0632 must be installed.
Code
Item
A0632
Pair of inclin. Ceiling brack. LEM/Rio L
Installation instructions download
Brackets for ceiling mounting, in hot‑galvanised steel painted in white polyester.
The bracket A0632 allows the luminaire to be ceiling mounted without the possibility to rotate it.
To allow free orientation, both accessories (A0651+A0632) must be installed.
Code
Item
A0654
Pair of wall brackets - 3F LEM
Installation instructions download
Brackets for wall mounting, in in hot‑galvanised steel painted in white polyester.
The bracket A0654 allows the luminaire to be wall mounted without the possibility to rotate it.
To allow free orientation, both accessories (A0651+A0654) must be installed.
Code
Item
A0651
Bracket rotation support 3F LEM
Installation instructions download
Additional bracket that, combined with the A0654 or A0632 accessories, makes it possible for the luminaires to be oriented on the ceiling or the wall, in hot‑galvanised steel painted in white polyester.
This accessory must ALWAYS be used with one of the following codes: A0632 ‑ A0654.
Code
Item
A0776
Horiz. rot. bracket 90° 3F LEM 1-2
Installation instructions download
A0777
Horiz. rot. brack. 90° 3F LEM 3-2 Sensor
Installation instructions download
A0778
Horizontal rotating bracket 90° 3F LEM 4
Installation instructions download
Brackets for rotating luminaries mounted on ceilings or on bus ducts.
Code
Item
A0728
Cover for food appl. 3F LEM 1
A0733
Cov.food appl.single mod.3F LEM(2-3-4-5)
Installation instructions download
Dust covers for food processing areas in white‑painted galvanised steel.
For a LEM 3, for example, 3 pcs of the cod. A0733 must be ordered.
Not available for the 1+1 version.
Note: the maximum ambient operating temperatures of the fixtures decrease by 10°C in all families, except for the High Output versions in which the reduction is 5°C.
The reduction in the luminous flux emitted is equal to 3% in all models in the range.
Code
Item
A0653
Pair of fixing carab.for chain instal.
Snap hooks clips for chain suspension, galvanised steel.
Code
Item
A0811
Transparent glass with gasket (10pcs)
The pack contains 10 pieces.
Installation instructions download
A0812
Moulded glass with gasket (10pcs)
The pack contains 10 pieces.
Installation instructions download
Glass with gasket to protect the louvre compartment from dust.
Recommended for use in very dirty environments.
Code
Item
A0242
15SS galvanized steel cable coil 100m
The pack contains 100 metres.
A0243
15BF galvanized steel cable coil 500m
The pack contains 500 metres.
Anti‑fall safety cable Ø 2 mm for fastening the body to the building structure.
Coupling accessory A0714 to one of the two safety cables (A0242 or A0243) provides an anti‑fall kit fixing and adjusting the cable on the load‑bearing element of the building structure.
The cable passes between the two passage holes on the hanging brackets.
Suitable for environments subject to impacts or seismic zones.
Code
Item
A0714
Clamp 2 holes susp.- 100 pcs
The pack contains 100 pieces.
Clamp in nickel‑plated brass suitable for fixing and adjustment of galvanised steel wire (diameter 1,25 mm 1,5 mm ‑ 2 mm), complete with locking screws.
The 2 hole clamp allows to block and adjust the cable on a bearing element (part of the building) or on rounded eye bolt.
Code
Item
A0521
Reducing sealing ring diam.8mm
Reducing sealing ring, dedicated to the use of cables with an external diameter of up to 8 mm.
Instruments
lightUpdate
The information, at the speed of Light.
Subscribe to lightUpdate to keep in touch with 3F Filippi: news, events and product news delivered to your mailbox.
Head office and factory
3F Filippi S.p.A.
Via del Savena 28, Z.I. Piastrella
40065 Pian di Macina, Pianoro (Bologna), Italy
Tax Code. 01033260371 - VAT no. IT00529461204
Share Capital € 3,000,000 fully paid up
Bologna Register of Companies no. 01033260371
REA (economic administrative index) No. 234613

e-Mail: 3f-filippi@3f-filippi.it
Telephone: +39.051.6529611
Fax: +39.051.775884
Group
Social
lightUpdate
The information, at the speed of Light.
Subscribe to lightUpdate to keep in touch with 3F Filippi: news, events and product news delivered to your mailbox.
Cookie information
ACCEPT
This site uses only technical cookies, including third-party cookies, and does not use any profiling cookies.
In order to access the site, it is necessary to consent to the use of cookies by clicking on the "Accept" button.
For more information on how we use cookies and how to remove them, see our cookie policy.