3F Linda HO
High lumen output LED sources.
Snug fit safety snap‑lock clips for diffuser mounting in stainless steel, screwdriver opening.
ON/OFF electronic wiring 230V‑50/60Hz
Code
Item
W
lm
K
CRI
L x A x H
IP
57703
3F Linda LED HO 1x50W/840 L1270
56
9042
4000
>80
1270x100x100
66
57704
3F Linda LED HO 1x62W/840 L1570
69
11194
4000
>80
1570x100x100
66
3F Linda LED HO 2x40W/840 L1570
87
15039
4000
>80
1570x160x100
66
EP maintained emergency wiring, 1hr duration with 24hrs recharge
Code
Item
W
lm
K
CRI
L x A x H
IP
57711
3F Linda LED HO 1x50W/840 EP L1270
57
9042
4000
>80
1270x100x100
66
57712
3F Linda LED HO 1x62W/840 EP L1570
70
11194
4000
>80
1570x100x100
66
3F Linda LED HO 2x40W/840 EP L1570
88
15039
4000
>80
1570x160x100
66
DALI electronic wiring 230V‑50/60Hz
Code
Item
W
lm
K
CRI
L x A x H
IP
57719
3F Linda LED HO 1x50W/840 DALI L1270
56
9042
4000
>80
1270x100x100
66
57720
3F Linda LED HO 1x62W/840 DALI L1570
69
11194
4000
>80
1570x100x100
66
3F Linda LED HO 2x40W/840 DALI L1570
87
15039
4000
>80
1570x160x100
66
DALI ‑ EP maintained emergency wiring, 1hr duration with 24hrs recharge
Code
Item
W
lm
K
CRI
L x A x H
IP
57727
3F Linda LED HO 1x50W/840 DALI EP L1270
57
9042
4000
>80
1270x100x100
66
57728
3F Linda LED HO 1x62W/840 DALI EP L1570
70
11194
4000
>80
1570x100x100
66
3F Linda LED HO 2x40W/840 DALI EP L1570
88
15039
4000
>80
1570x160x100
66
ILLUMINOTECHNICAL
Controlled symmetric distribution.
Lifetime (L80/B10): 100000 h. (tq+25°C)
Photobiological safety RG0.
SOURCE
Linear LED modules.
Colour initial tolerance (MacAdam): SDCM 3.
MECHANICAL
Self‑extinguishing V2 polycarbonate housing, injection moulded, RAL 7035 grey.
Ecologic anti‑aging injected sealing gasket.
Gear‑holder reflector in hot‑dip galvanised steel, painted with white polyester base.
Diffuser in self‑extinguishing V2 polycarbonate, photo‑engraved interior, UV stabilised, injection moulded with smooth outer surface.
Stainless steel fixing brackets, L=300 mm versions excluded.
ELECTRICAL
In compliance with EN 60598‑1.
Compliance with the EN 60598‑2‑22 standard for power supply from a centralised CPSS emergency system must be verified in the technical data sheets of each individual device on our website.
The luminaires with EP permanent emergency wiring on board comply with EN 60598‑2‑22 standard, high risk areas excluded.
APPLICATIONS
Dry, dusty indoor environments, subject to occasional water splashes.
Virtually shatterproof polycarbonate compatibly with the fumes / atmospheres that compromise the elasticity of plastic materials.
Not suitable in environments where chlorine fumes, ligroin, hydrocarbon mixtures, mineral oil vapours or fumes of lubricating emulsions to cool down machine tools are present.
Not suitable for installation on surfaces subject to important vibrations, exposed to weather conditions, on ropes or poles.
Suitable product for food production plants (HACCP), IFS (Food Version 6), BRC (GSFS Food Version 7).
Suitable for illumination of public car parks and parking grounds referred to DIN 67528:2018‑04.
For specific applications please contact our technical offices.
WARNING
Fixture not suitable for cold stores with an ambient temperature <0°C and/or relative humidity >85%.
ON REQUEST
- different colour rendering indices and colour temperatures
- wiring: CLO, class II
- linear LED modules, with special protection against aggressive chemically‑volatile substances, for standard LED technology
- double switch‑on for 2x ON/OFF versions
- emergency versions
Code
Item
A0660
Suspension with adjustment - 1m
A0661
Suspension with adjustment - 2 m
A0662
Suspension with adjustment - 3 m
A0663
Suspension with adjustment - 4 m
A0664
Suspension with adjustment - 5 m
A0665
Suspension with adjustment - 6 m
Suspension with regulator, galvanised steel cable 1.5 mm diameter, load 15 kg.
Attention: each product requires two suspensions with regulator.Code
Item
A0160
Inox clips 3F Linda L660 -4pcs
The pack contains 4 pieces.A0161
Inox clips 3F Linda L1270 -8pcs
The pack contains 8 pieces.A0162
Inox clips 3F Linda L1570 -10pcs
The pack contains 10 pieces.Snug fit snap‑lock clips for diffuser mounting, in stainless steel, safety opening.
Code
Item
A0449
15 GZI w/brack.+ hooks Linda L300
A0450
15 RIT w/bra.+hooks Linda L660-1270-1570
Pair of brackets and hooks in stainless steel, with nuts and bolts for fixing to 3F Linda, for ceiling or wall‑mounting, single and twin‑lamp luminaires.
Minimum tilt angle = 45°.
Code
Item
A0451
15 MBI w/brack.+ hooks Linda L300
A0452
15 FBR w/bra.+hooks Linda L660-1270-1570
Pair of brackets and hooks in stainless steel, with nuts and bolts for fixing to 3F Linda, for wall‑mounting, single and twin‑lamp luminaires.
Code
Item
A0462
13 GSI (pair of susp. hooks Linda L300)
A0463
13 TRM pair of susp.hooks Linda
Pair of stainless steel hooks for suspended installation, with cable clip and nuts and bolts for installation to 3F Linda.
Wire‑guard for applications in dry environments, against shocks coming from any directions, galvanised steel rod Ø 5 mm.
Only for luminaires fixed without hooks.Code
Item
A0447
3F Linda through-line L1570
5‑pole cascade connection line, stiff cable H07 V2‑U, HT 90°C, 1.5 mm², terminal blocks with connection capacity 2x2.5 mm².
Accessory not compatible with ST versions of 3F Linda LED Basic.Anti‑condensation diffuser cable gland.
Code
Item
A0521
Reducing sealing ring diam.8mm
Reducing sealing ring, dedicated to the use of cables with an external diameter of up to 8 mm.
Code
Item
A0464
26 CSG (pictogram P1 Linda L300)
A0465
26 MTH (pictogram P1 Linda L660)
Pictograms for warning signs to be applied on emergency luminaire's diffusers 160 mm wide.
Pictogram, 135 mm high, 240 mm long for L300 luminaires, 605 mm long for L660 luminaires.
Pictograms complying with European standards concerning health and safety signals on the workplace.
Code
Item
A0466
26 DVI (pictogram P2 Linda L300)
A0467
26 MVL (pictogram P2 Linda L660)
Pictograms for warning signs to be applied on emergency luminaire's diffusers 160 mm wide.
Pictogram, 135 mm high, 240 mm long for L300 luminaires, 605 mm long for L660 luminaires.
Pictograms complying with European standards concerning health and safety signals on the workplace.
Code
Item
A0468
26 GZM (pictogram P3 Linda L300)
A0469
26 PXN (pictogram P3 Linda L660)
Pictograms for warning signs to be applied on emergency luminaire's diffusers 160 mm wide.
Pictogram, 135 mm high, 240 mm long for L300 luminaires, 605 mm long for L660 luminaires.
Pictograms complying with European standards concerning health and safety signals on the workplace.
Code
Item
A0434
Safety screw locking Linda - 20 pcs
The pack contains 20 pieces.A0435
Safety screw locking Linda - 100 pcs
The pack contains 100 pieces.Safety screw for 3F Linda locking bracket
