3F Rio HT C Wide
Circular version.
Wide rotosymmetric distribution.
ON/OFF electronic wiring 230V‑50/60Hz
3F Rio HT 3C 11000/840 WIDE
63
10726
4000
>80
462x175
66
3F Rio HT 6C 21000/840 WIDE
119
21452
4000
>80
626x175
66
3F Rio HT C Medium
Circular version.
Medium rotosymmetric distribution.
ON/OFF electronic wiring 230V‑50/60Hz
3F Rio HT 3C 11000/840 MEDIUM
63
10726
4000
>80
462x175
66
3F Rio HT 6C 21000/840 MEDIUM
119
21452
4000
>80
626x175
66
ILLUMINOTECHNICAL
Wide, medium and concentrated distribution.
Lifetime (L80/B10): 100000 h. (tq+25°C)
Luminous flux at +70°C: ‑13.5%.
Photobiological safety RG0.
SOURCE
Circular LED modules.
Colour initial tolerance (MacAdam): SDCM 3.
MECHANICAL
Modular structure depending on the number of heat sinks used for circular (C) or linear (L) versions.
Passive modular heatsinks in die‑casted aluminium, painted in white colour.
To optimize the thermal management of the LED module, the heatsinks are oversized and provided with self‑cleaning of cooling fins.
Heavy‑gauge stainless steel plate for maximum strength and a circular wiring compartment consisting of a die‑cast, in white painted aluminium monoblock with a fixed central ring with luminaire alignment function.
3F Lens lenses in transparent polycarbonate with external flat surface, with high luminous efficiency.
Polyurethane foam seal, ecological, anti‑aging, installed using a continuous automatic process with no joints.
Galvanised steel safety cable ø 2 mm and clamps, supplied.
Galvanised steel carabiner for central fixing with chain, supplied.
ELECTRICAL
In compliance with EN 60598‑1.
Power unit positioned on a separate compartment by the LED module to ensure optimum temperatures of cabling components, to be inspectable and maintainable.
Compliance with the EN 60598‑2‑22 standard for power supply from a centralised CPSS emergency system must be verified in the technical data sheets of each individual device on our website.
Quick connection via 3/5 P connector.
INSTALLATION
Ceiling mounted or suspension installation via accessory.
APPLICATIONS
Ambient temperature from ‑30°C to +70°C.
Dry, dusty indoor environments, subject to occasional water splashes.
Commercial, industrial and sporting environments (with no high‑flying balls), as well as warehouses.
Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with extreme temperature changes).
WARNING
Fixture not suitable for cold stores with an ambient temperature <0°C and/or relative humidity >85%.
ON REQUEST
- different linear compositions
- different power levels, colour rendering indices and colour temperatures
- housing in different RAL colours
- double switch‑on for ON/OFF versions
- wiring: CLO
- dual‑input power line
Code
Item
Pair of brackets ceiling Rio C
Brackets for mounting of luminaire on ceiling, stainless steel.
Code
Item
A0652
Pair of brack. ceiling instal. 3F LEM
Brackets for mounting of luminaire on ceiling or on bus ducts, stainless steel.
Please note: these brackets do NOT provide free orientation of the luminaire. To allow free orientation, accessories A0651+A0632 must be installed.Brackets for ceiling mounting, in hot‑galvanised steel painted in white polyester.
The bracket A0632 allows the luminaire to be ceiling mounted without the possibility to rotate it.
To allow free orientation, both accessories (A0651+A0632) must be installed.Brackets for wall mounting, in in hot‑galvanised steel painted in white polyester.
The bracket A0654 allows the luminaire to be wall mounted without the possibility to rotate it.
To allow free orientation, both accessories (A0651+A0654) must be installed.Additional bracket that, combined with the A0654 or A0632 accessories, makes it possible for the luminaires to be oriented on the ceiling or the wall, in hot‑galvanised steel painted in white polyester.
This accessory must ALWAYS be used with one of the following codes: A0632 ‑ A0654.Brackets for rotating luminaries mounted on ceilings or on bus ducts.
Code
Item
A0242
15SS galvanized steel cable coil 100m
The pack contains 100 metres.A0243
15BF galvanized steel cable coil 500m
The pack contains 500 metres.Anti‑fall safety cable Ø 2 mm for fastening the body to the building structure.
Coupling accessory A0714 to one of the two safety cables (A0242 or A0243) provides an anti‑fall kit fixing and adjusting the cable on the load‑bearing element of the building structure.
The cable passes between the two passage holes on the hanging brackets.
Suitable for environments subject to impacts or seismic zones.Code
Item
A0714
Clamp 2 holes susp.- 100 pcs
The pack contains 100 pieces.Clamp in nickel‑plated brass suitable for fixing and adjustment of galvanised steel wire (diameter 1,25 mm 1,5 mm ‑ 2 mm), complete with locking screws.
The 2 hole clamp allows to block and adjust the cable on a bearing element (part of the building) or on rounded eye bolt.
Code
Item
Cable gland reducer ø7-9mm for CR 3P
The pack contains 10 pieces.Cable gland reducer ø13-17mm for CR 5P
The pack contains 10 pieces.A01006 compatible with ON/OFF, SENSEHBZQ e SENSEMBZQ versions, reduces the power line input from ø9‑13mm to ø7‑9mm.
A01007 compatible with EP e D2D versions, increases the power line input from ø9‑13mm to ø13‑17mm.
