Caddy hook to create a point from which to suspend the system or the loads to false ceilings with visible profiles.
| Code | Description | |
|---|---|---|
| A02562 | Caddy for exposed profiles of 24 mm | i |
Connection to the earth, by means of galvanised M5 screw and nut, for Ø 6 mm hole at the end of every structure.
Additional contact for light unit plug.
| Code | Description | |
|---|---|---|
| A20476 | Contact pin for 3F Linux plug (50 pcs.) | i |
Element to connect in hot-galvanised steel.
| Code | Description | |
|---|---|---|
| A20433 | Linear connecting element | i |
High closing top, with a length of 1778 mm that can be cut to 889 mm, made of impact-resistant PVC.
650°CPair of closing end 3F Linux S, made of polycarbonate.
850°CFree-position invisible sliding bracket with regulator in stainless steel.
| Code | Description | |
|---|---|---|
| A20450 | Slid.invis.brack.w/adj.for susp.3F Linux | i |
Hook to suspended luminaires to a chain.
| Code | Description | |
|---|---|---|
| A20452 | Stainless steel hook for chain | i |
Wall-mounting bracket, in white painted steel.
| Code | Description | |
|---|---|---|
| A0052 | Wall-mounting brack | i |
Quick connection non-reversible plug-socket terminal block, for connection to the power line at the start or end of the channel.
Electric branch with plug-socket to realise L-shaped connections.
Brackets for the installation of luminaries on 3F Linux S and S-NL bars (check the compatibility with our technical departments). Made of hot galvanised steel.
| Code | Description | |
|---|---|---|
| A20470 | Pair of mounting brack. lum. 3F Linux S | i |
Safety screw for locking the sliding bracket, made of hot galvanised steel.
Power cable for luminaires not part of the 3F Linux system.
Suspension without controller, galvanised steel cable 1.5 mm diameter, load 15 kg.
| Code | Description | |
|---|---|---|
| A20486 | Suspension without adjustment - 1 m | i |
| A20489 | Suspension without adjustment - 4 m | i |
| A20487 | Suspension without adjustment - 2 m | i |
| A20491 | Suspension without adjustment - 6 m | i |
| A20485 | Suspension without adjustment - 0.5 m | i |
| A20488 | Suspension without adjustment - 3 m | i |
| A20490 | Suspension without adjustment - 5 m | i |
Galvanised steel cable, diameter 1.5 mm, composed of 49 wires. 15 kg capacity (ratio 5:1).
Free-position sliding bracket in stainless steel.
| Code | Description | |
|---|---|---|
| A20453 | S-shaped chain hook w/slid.bra. 3F Linux | i |
Clamp in nickel-plated brass suitable for fixing and adjustment of galvanised steel wire (diameter 1,25 mm - 1,5 mm - 2 mm), complete with locking screws. The 2 hole clamp allows to block and adjust the cable on a bearing element (part of the building) or on rounded eye bolt.
| Code | Description | |
|---|---|---|
| A0714 | Clamp 2 holes susp.- 100 pcs | i |
Free-position sliding bracket in stainless steel.
| Code | Description | |
|---|---|---|
| A20451 | Slid.invis.brack.ceiling instal.3F Linux | i |
Clamp suitable for fixing and adjustment of galvanised steel wire (diameter 1.5 mm), with quick adjustment through unlock buttons. The clamp with 2 holes allow to fix and adjust the cable on the carrier structural element (belonging to the building) or with eye screw fixing.
| Code | Description | |
|---|---|---|
| A0659 | Adjustable clamp 2 holes - 10 pcs | i |
Safety bracket in white painted steel to secure lighting elements if installed vertically.
| Code | Description | |
|---|---|---|
| A20478 | Anti-slip term. incli. 3F Linux | i |
Electric cable support. One every 50 cm is recommended. Made of polycarbonate.
| Code | Description | |
|---|---|---|
| A20475 | 3F Linux Cable Support (10 pcs) | i |
Quick connection non-reversible plug-socket terminal block, for connection to the power line at the centre of the channel.
T-shaped connecting element in hot-galvanised steel.
L-shaped connecting element in hot-galvanised steel.
Cuttable low closing top, with a length of 1778 mm that can be cut, made of impact-resistant white PVC.
Electric branch with plug-socket to realise T-shaped connections.
Extension cord to connect some light modules interspersed with blind covers with a length of 889 mm (contact our technical department).
Brackets for installation of 3F Linda luminaries on 3F Linux S structures. Made from hot-galvanised steel.
| Code | Description | |
|---|---|---|
| A20504 | COPPIA STAFFE FISSAGGIO LINDA SU LINUX S | i |
