Wide or concentrated direct distribution. Lifetime (L80/B10): 100000 h. (tq+25°C) Photobiological safety RG0 (page §ISF§).

Linear LED modules. Colour initial tolerance (MacAdam): SDCM 3.

Single-piece housing in pressed steel, powder-coated in white epoxy-polyester. Oversized flux recuperator in specular aluminium, with titanium-magnesium surface treatment, non-iridescent. Gear-tray unit in hot-galvanised steel, painted in white polyester, fixed to the housing by means of "Ribloc" rapid devices in galvanised steel, hinged opening. Stainless steel screen fixing clips.

In compliance with EN 60598-1. Compliance with the EN 60598-2-22 standard for power supply from a centralised CPSS emergency system must be verified in the technical data sheets of each individual device on our website. The luminaires with EP permanent emergency wiring on board comply with EN 60598-2-22 standard, high risk areas excluded. Entry for power-supply cable at one end cap, through M20x1,

Ceiling, suspended, on busbar or wall-mounted. For mounting hooks and brackets see accessories on page §ACCPAGE§.

Ambient temperature from -20°C to +35°C. Dry, dusty indoor environments, subject to occasional water splashes. Industrial environments, warehouses, environments requiring safety luminaires, such as prisons, thanks to the clips that can be locked by bolts (on request). Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines wit

Fixture not suitable for cold stores with an ambient temperature <0°C and/or relative humidity >85%.