Category

Accessories

3F Linux

Caddy hook to create a point from which to suspend the system or the loads to false ceilings with visible profiles.
CA014
CodeDescription
A02562Caddy for exposed profiles of 24 mm
Note: To be installed on exposed profiles (width 24 mm) of false ceilings.
We recommend reinforcing the false-ceiling fixing at the point where the Caddy is to be installed.
Supplied complete with nut and washer.
The suspension must be purchased separately.
Connection to the earth, by means of galvanised M5 screw and nut, for Ø 6 mm hole at the end of every structure.
CA020
CodeDescription
A0478Earthing - 10pcs
Additional contact for light unit plug.
CA037
CodeDescription
A20476Contact pin for 3F Linux plug (50 pcs.)
Note: Accessory not compatible with codes: A20011 - A20012.
Element to connect in hot-galvanised steel.
CA039
CodeDescription
A20433Linear connecting element
High closing top, with a length of 1778 mm that can be cut to 889 mm, made of impact-resistant PVC.
CA040
650°C 650°C
CodeDescription
A20442WH high-closing cover - L1778
A20441BK high-closing cover - L1778
Pair of closing end 3F Linux S, made of polycarbonate.
CA041
850°C 850°C
CodeDescription
A20481BK Pair of closing end 3F Linux
A20448WH Pair of closing end 3F Linux Si
Free-position invisible sliding bracket with regulator in stainless steel.
CA042
CodeDescription
A20450Slid.invis.brack.w/adj.for susp.3F Linux
Note: The suspension cable must be made of galvanised steel with 49 elementary wires of minimum 1.5 mm diameter (for a weight of 15 kg) and 2 mm (for a weight of 25 kg).
Hook to suspended luminaires to a chain.
CA043
CodeDescription
A20452Stainless steel hook for chain
Wall-mounting bracket, in white painted steel.
CA056
CodeDescription
A0052Wall-mounting brack
Quick connection non-reversible plug-socket terminal block, for connection to the power line at the start or end of the channel.
CA058
CodeDescription
A204545-pole socket-plug term.block 3F Linux S
A204557-pole socket-plug term.block 3F Linux S
Note: Accessories not compatible with codes: A20011 - A20012.
Electric branch with plug-socket to realise L-shaped connections.
CA059
CodeDescription
A204607-pole socket-plug L-branch 3F Linux S
A204595-pole socket-plug L-branch 3F Linux S
Note: These accessories must ALWAYS be used with code A20436.
Accessories not compatible with codes: A20011 - A20012.
Brackets for the installation of luminaries on 3F Linux S and S-NL bars (check the compatibility with our technical departments). Made of hot galvanised steel.
CA062
CodeDescription
A20470Pair of mounting brack. lum. 3F Linux S
Safety screw for locking the sliding bracket, made of hot galvanised steel.
CA063
CodeDescription
A20472SAFE.SCREW LOCK.SLID.BRA.3F LINUX 10pcs
Note: These accessories must ALWAYS be used with one of the following codes: A20450 - A20451 - A20453.
Power cable for luminaires not part of the 3F Linux system.
CA064
CodeDescription
A20479Power cable for luminaires 3P-3F Linux
A20480Power cable for luminaires 5P-3F Linux
Note: Accessories not compatible with codes: A20011 - A20012.
Suspension without controller, galvanised steel cable 1.5 mm diameter, load 15 kg.
CA065
CodeDescription
A20486Suspension without adjustment - 1 m
A20489Suspension without adjustment - 4 m
A20487Suspension without adjustment - 2 m
A20491Suspension without adjustment - 6 m
A20485Suspension without adjustment - 0.5 m
A20488Suspension without adjustment - 3 m
A20490Suspension without adjustment - 5 m
Galvanised steel cable, diameter 1.5 mm, composed of 49 wires. 15 kg capacity (ratio 5:1).
CA177
CodeDescription
A0717Coil galv. cable diam. 1.5mm - 500m
A0716Coil galv. cable diam. 1.5mm - 100m
A0718Coil galv. cable diam. 1.5mm - 1000m
Note: These accessories must ALWAYS be used with one of the following codes: A20452 ‑ A0714 ‑ A0659.
Free-position sliding bracket in stainless steel.
CA179
CodeDescription
A20453S-shaped chain hook w/slid.bra. 3F Linux
Note: Supplied with S-hook for galvanised steel chain.
Clamp in nickel-plated brass suitable for fixing and adjustment of galvanised steel wire (diameter 1,25 mm - 1,5 mm - 2 mm), complete with locking screws. The 2 hole clamp allows to block and adjust the cable on a bearing element (part of the building) or on rounded eye bolt.
CA183
CodeDescription
A0714Clamp 2 holes susp.- 100 pcs
Free-position sliding bracket in stainless steel.
CA203
CodeDescription
A20451Slid.invis.brack.ceiling instal.3F Linux
Clamp suitable for fixing and adjustment of galvanised steel wire (diameter 1.5 mm), with quick adjustment through unlock buttons. The clamp with 2 holes allow to fix and adjust the cable on the carrier structural element (belonging to the building) or with eye screw fixing.
CA210
CodeDescription
A0659Adjustable clamp 2 holes - 10 pcs
Note: This accessory can be used with one of the following codes: A0716 ‑ A0717 ‑ A0718.
Safety bracket in white painted steel to secure lighting elements if installed vertically.
CA230
CodeDescription
A20478Anti-slip term. incli. 3F Linux WH
Note: This accessory must ALWAYS be used with code A20448.
Electric cable support. One every 50 cm is recommended. Made of polycarbonate.
CA231
CodeDescription
A204753F Linux Cable Support (10 pcs)
Quick connection non-reversible plug-socket terminal block, for connection to the power line at the centre of the channel.
CA248
CodeDescription
A20500Cen.pow-sup.soc-plug ter-blo.3FLinuxS 5P
A20501Cen.pow-sup.soc-plug ter-blo.3FLinuxS 7P
Note: Accessories not compatible with codes: A20011 - A20012.
T-shaped connecting element in hot-galvanised steel.
CA250
CodeDescription
A20434WH T-CONNECTING ELEMENT 3F LINUX
A20435BK T-CONNECTING ELEMENT 3F LINUX
Note: Accessory not compatible with codes: A20428 - A20426.
L-shaped connecting element in hot-galvanised steel.
CA251
CodeDescription
A20437BK L-CONNECTING ELEMENT 3F LINUX
A20436WH L-CONNECTING ELEMENT 3F LINUX
Note: Accessory not compatible with codes: A20428 - A20426.
Cuttable low closing top, with a length of 1778 mm that can be cut, made of impact-resistant white PVC.
CA271
650°C 650°C
CodeDescription
A20426BK LOW-CLOSING COVER - L1778
A20428WH LOW-CLOSING COVER - L1778
Electric branch with plug-socket to realise T-shaped connections.
CA274
CodeDescription
A204657-pole socket-plug T-branch 3F Linux S
A204645-pole socket-plug T-branch 3F Linux S
Note: These accessories must ALWAYS be used with code A20434.
Accessories not compatible with codes: A20011 - A20012.
Extension cord to connect some light modules interspersed with blind covers with a length of 889 mm (contact our technical department).
CA304
CodeDescription
A0802Electric ext. with 3P plug 3F Linux S
A0801Electric ext. with 5P plug 3F Linux S
Note: Both codes are supplied with a free-wire extension cable and a 7P 3F Linux power tower for a possible switchover.
Brackets for installation of 3F Linda luminaries on 3F Linux S structures. Made from hot-galvanised steel.
CA364
CodeDescription
A20504PAIR BRACK.3F LINDA INSTAL.IN 3F LINUX Si