Brackets for mounting of luminaire on ceiling or on bus ducts, stainless steel.
| Code | Description | |
|---|
| A0652 | Pair ceiling brackets 3F LEM/RIO L | i |
Note: Please note: these brackets do NOT provide free orientation of the luminaire. To allow free orientation, accessories A0651+A0632 must be installed.
Snap hooks clips for chain suspension, galvanised steel.
| Code | Description | |
|---|
| A0653 | Pair of fixing carab.for chain instal. | i |
Clamp in nickel-plated brass suitable for fixing and adjustment of galvanised steel wire (diameter 1,25 mm - 1,5 mm - 2 mm), complete with locking screws. The 2 hole clamp allows to block and adjust the cable on a bearing element (part of the building) or on rounded eye bolt.
| Code | Description | |
|---|
| A0714 | Clamp 2 holes susp.- 100 pcs | i |
Brackets for wall mounting, in in hot-galvanised steel painted in white polyester.
| Code | Description | |
|---|
| A0654 | Pair wall brackets LEM/RIO L | i |
Note: The bracket A0654 allows the luminaire to be wall mounted without the possibility to rotate it.
To allow free orientation, both accessories (A0651+A0654) must be installed.
Dust covers for food processing areas in white-painted galvanised steel.
HACCP
| Code | Description | |
|---|
| A0728 | Cover for food appl. 3F LEM 1 | i |
| A0733 | Cov.food appl.single mod.3F LEM(2-3-4-5) | i |
Note: For a LEM 3, for example, 3 pcs of the cod. A0733 must be ordered.
Not available for the 1+1 version.
Note: the maximum ambient operating temperatures of the fixtures decrease by 10°C in all families, except for the High Output versions in which the reduction is 5°C.
The reduction in the luminous flux emitted is equal to 3% in all models in the range.
Brackets for rotating luminaries mounted on ceilings or on bus ducts.
| Code | Description | |
|---|
| A0776 | STAFFA ROTAZ. LEM 1-2/RIO 2L-S | i |
| A0777 | Staffa rotazione LEM 2S-3/Rio 3L | i |
| A0778 | STAFFA ROTAZ. LEM 4/RIO 3LS-4L | i |
| A0779 | STAFFA ROTAZ. RIO 4LS | i |
Glass with gasket to protect the louvre compartment from dust. Recommended for use in very dirty environments.
| Code | Description | |
|---|
| A0811 | Transparent glass with gasket (10pcs) | i |
| A0812 | Moulded glass with gasket (10pcs) | i |
Brackets for ceiling mounting, in hot-galvanised steel painted in white polyester.
| Code | Description | |
|---|
| A0632 | COPPIA STAFFE SOFFITTO INCLIN. LEM/RIO L | i |
Note: The bracket A0632 allows the luminaire to be ceiling mounted without the possibility to rotate it.
To allow free orientation, both accessories (A0651+A0632) must be installed.
Anti-fall safety cable Ø 2 mm for fastening the body to the building structure.
| Code | Description | |
|---|
| A0243 | 15BF galvanized steel cable coil 500m | i |
| A0242 | 15SS galvanized steel cable coil 100m | i |
Note: Coupling accessory A0714 to one of the two safety cables (A0242 or A0243) provides an anti-fall kit fixing and adjusting the cable on the load-bearing element of the building structure.
The cable passes between the two passage holes on the hanging brackets.
Suitable for environments subject to impacts or seismic zones.
Additional bracket that, combined with the A0654 or A0632 accessories, makes it possible for the luminaires to be oriented on the ceiling or the wall, in hot-galvanised steel painted in white polyester.
| Code | Description | |
|---|
| A0651 | SUPP. ROTAZ. COPPIA STAFFE LEM/RIO L | i |
Note: This accessory must ALWAYS be used with one of the following codes: A0632 - A0654.
Reducing sealing ring, dedicated to the use of cables with an external diameter of up to 8 mm.
| Code | Description | |
|---|
| A0521 | Reducing sealing ring diam.8mm | i |
