Caddy hook to create a point from which to suspend the system or the loads to false ceilings with visible profiles.
| Code | Description | |
|---|
| A02562 | Caddy for exposed profiles of 24 mm | i |
Note: To be installed on exposed profiles (width 24 mm) of false ceilings.
We recommend reinforcing the false-ceiling fixing at the point where the Caddy is to be installed.
Supplied complete with nut and washer.
The suspension must be purchased separately.
Connection to the earth, by means of galvanised M5 screw and nut, for Ø 6 mm hole at the end of every structure.
| Code | Description | |
|---|
| A0490 | Earthing | i |
| A0478 | Earthing - 10pcs | i |
Additional contact for light unit plug.
| Code | Description | |
|---|
| A20476 | Contact pin for 3F Linux plug (50 pcs.) | i |
Note: Accessory not compatible with codes: A20011 - A20012.
Element to connect in hot-galvanised steel.
| Code | Description | |
|---|
| A20433 | Linear connecting element | i |
High closing top, with a length of 1778 mm that can be cut to 889 mm, made of impact-resistant PVC.
650°C
| Code | Description | |
|---|
| A20442 | WH high-closing cover - L1778 | i |
| A20441 | BK high-closing cover - L1778 | i |
Pair of closing end 3F Linux S, made of polycarbonate.
850°C
| Code | Description | |
|---|
| A20481 | BK Pair of closing end 3F Linux | i |
| A20448 | WH Pair of closing end 3F Linux S | i |
Free-position invisible sliding bracket with regulator in stainless steel.
| Code | Description | |
|---|
| A20450 | Slid.invis.brack.w/adj.for susp.3F Linux | i |
Note: The suspension cable must be made of galvanised steel with 49 elementary wires of minimum 1.5 mm diameter (for a weight of 15 kg) and 2 mm (for a weight of 25 kg).
Hook to suspended luminaires to a chain.
| Code | Description | |
|---|
| A20452 | Stainless steel hook for chain | i |
Wall-mounting bracket, in white painted steel.
| Code | Description | |
|---|
| A0052 | Wall-mounting brack | i |
Quick connection non-reversible plug-socket terminal block, for connection to the power line at the start or end of the channel.
| Code | Description | |
|---|
| A20454 | 5-pole socket-plug term.block 3F Linux S | i |
| A20455 | 7-pole socket-plug term.block 3F Linux S | i |
Note: Accessories not compatible with codes: A20011 - A20012.
Electric branch with plug-socket to realise L-shaped connections.
| Code | Description | |
|---|
| A20460 | 7-pole socket-plug L-branch 3F Linux S | i |
| A20459 | 5-pole socket-plug L-branch 3F Linux S | i |
Note: These accessories must ALWAYS be used with code A20436.
Accessories not compatible with codes: A20011 - A20012.
Brackets for the installation of luminaries on 3F Linux S and S-NL bars (check the compatibility with our technical departments). Made of hot galvanised steel.
| Code | Description | |
|---|
| A20470 | Pair of mounting brack. lum. 3F Linux S | i |
Safety screw for locking the sliding bracket, made of hot galvanised steel.
| Code | Description | |
|---|
| A20474 | SAFE.SCREW LOCK.SLID.BRA.3F LINUX | i |
| A20472 | SAFE.SCREW LOCK.SLID.BRA.3F LINUX 10pcs | i |
Note: These accessories must ALWAYS be used with one of the following codes: A20450 - A20451 - A20453.
Power cable for luminaires not part of the 3F Linux system.
| Code | Description | |
|---|
| A20479 | Power cable for luminaires 3P-3F Linux | i |
| A20480 | Power cable for luminaires 5P-3F Linux | i |
Note: Accessories not compatible with codes: A20011 - A20012.
Suspension without controller, galvanised steel cable 1.5 mm diameter, load 15 kg.
| Code | Description | |
|---|
| A20486 | Suspension without adjustment - 1 m | i |
| A20489 | Suspension without adjustment - 4 m | i |
| A20487 | Suspension without adjustment - 2 m | i |
| A20491 | Suspension without adjustment - 6 m | i |
| A20485 | Suspension without adjustment - 0.5 m | i |
| A20488 | Suspension without adjustment - 3 m | i |
| A20490 | Suspension without adjustment - 5 m | i |
Galvanised steel cable, diameter 1.5 mm, composed of 49 wires. 15 kg capacity (ratio 5:1).
| Code | Description | |
|---|
| A0717 | Coil galv. cable diam. 1.5mm - 500m | i |
| A0716 | Coil galv. cable diam. 1.5mm - 100m | i |
| A0718 | Coil galv. cable diam. 1.5mm - 1000m | i |
Note: These accessories must ALWAYS be used with one of the following codes: A20452 ‑ A0714 ‑ A0659.
Free-position sliding bracket in stainless steel.
| Code | Description | |
|---|
| A20453 | S-shaped chain hook w/slid.bra. 3F Linux | i |
Note: Supplied with S-hook for galvanised steel chain.
Clamp in nickel-plated brass suitable for fixing and adjustment of galvanised steel wire (diameter 1,25 mm - 1,5 mm - 2 mm), complete with locking screws. The 2 hole clamp allows to block and adjust the cable on a bearing element (part of the building) or on rounded eye bolt.
| Code | Description | |
|---|
| A0714 | Clamp 2 holes susp.- 100 pcs | i |
Free-position sliding bracket in stainless steel.
| Code | Description | |
|---|
| A20451 | Slid.invis.brack.ceiling instal.3F Linux | i |
Clamp suitable for fixing and adjustment of galvanised steel wire (diameter 1.5 mm), with quick adjustment through unlock buttons. The clamp with 2 holes allow to fix and adjust the cable on the carrier structural element (belonging to the building) or with eye screw fixing.
| Code | Description | |
|---|
| A0659 | Adjustable clamp 2 holes - 10 pcs | i |
Note: This accessory can be used with one of the following codes: A0716 ‑ A0717 ‑ A0718.
Safety bracket in white painted steel to secure lighting elements if installed vertically.
| Code | Description | |
|---|
| A20478 | Anti-slip term. incli. 3F Linux WH | i |
Note: This accessory must ALWAYS be used with code A20448.
Electric cable support. One every 50 cm is recommended. Made of polycarbonate.
| Code | Description | |
|---|
| A20475 | 3F Linux Cable Support (10 pcs) | i |
Quick connection non-reversible plug-socket terminal block, for connection to the power line at the centre of the channel.
| Code | Description | |
|---|
| A20500 | Cen.pow-sup.soc-plug ter-blo.3FLinuxS 5P | i |
| A20501 | Cen.pow-sup.soc-plug ter-blo.3FLinuxS 7P | i |
Note: Accessories not compatible with codes: A20011 - A20012.
T-shaped connecting element in hot-galvanised steel.
| Code | Description | |
|---|
| A20434 | WH T-CONNECTING ELEMENT 3F LINUX | i |
| A20435 | BK T-CONNECTING ELEMENT 3F LINUX | i |
Note: Accessory not compatible with codes: A20428 - A20426.
L-shaped connecting element in hot-galvanised steel.
| Code | Description | |
|---|
| A20437 | BK L-CONNECTING ELEMENT 3F LINUX | i |
| A20436 | WH L-CONNECTING ELEMENT 3F LINUX | i |
Note: Accessory not compatible with codes: A20428 - A20426.
Cuttable low closing top, with a length of 1778 mm that can be cut, made of impact-resistant white PVC.
650°C
| Code | Description | |
|---|
| A20426 | BK LOW-CLOSING COVER - L1778 | i |
| A20428 | WH LOW-CLOSING COVER - L1778 | i |
Electric branch with plug-socket to realise T-shaped connections.
| Code | Description | |
|---|
| A20465 | 7-pole socket-plug T-branch 3F Linux S | i |
| A20464 | 5-pole socket-plug T-branch 3F Linux S | i |
Note: These accessories must ALWAYS be used with code A20434.
Accessories not compatible with codes: A20011 - A20012.
Extension cord to connect some light modules interspersed with blind covers with a length of 889 mm (contact our technical department).
| Code | Description | |
|---|
| A0802 | Electric ext. with 3P plug 3F Linux S | i |
| A0801 | Electric ext. with 5P plug 3F Linux S | i |
Note: Both codes are supplied with a free-wire extension cable and a 7P 3F Linux power tower for a possible switchover.
Brackets for installation of 3F Linda luminaries on 3F Linux S structures. Made from hot-galvanised steel.
| Code | Description | |
|---|
| A20504 | PAIR BRACK.3F LINDA INSTAL.IN 3F LINUX S | i |
