Brackets for mounting of luminaire on ceiling or on bus ducts, stainless steel.
| Code | Description | |
|---|
| A0652 | Pair ceiling brackets 3F LEM/RIO L | i |
Note: Please note: these brackets do NOT provide free orientation of the luminaire. To allow free orientation, accessories A0651+A0632 must be installed.
Clamp in nickel-plated brass suitable for fixing and adjustment of galvanised steel wire (diameter 1,25 mm - 1,5 mm - 2 mm), complete with locking screws. The 2 hole clamp allows to block and adjust the cable on a bearing element (part of the building) or on rounded eye bolt.
| Code | Description | |
|---|
| A0714 | Clamp 2 holes susp.- 100 pcs | i |
Brackets for wall mounting, in in hot-galvanised steel painted in white polyester.
| Code | Description | |
|---|
| A0654 | Pair wall brackets LEM/RIO L | i |
Note: The bracket A0654 allows the luminaire to be wall mounted without the possibility to rotate it.
To allow free orientation, both accessories (A0651+A0654) must be installed.
Brackets for rotating luminaries mounted on ceilings or on bus ducts.
| Code | Description | |
|---|
| A0776 | STAFFA ROTAZ. LEM 1-2/RIO 2L-S | i |
| A0777 | Staffa rotazione LEM 2S-3/Rio 3L | i |
| A0778 | STAFFA ROTAZ. LEM 4/RIO 3LS-4L | i |
| A0779 | STAFFA ROTAZ. RIO 4LS | i |
Brackets for ceiling mounting, in hot-galvanised steel painted in white polyester.
| Code | Description | |
|---|
| A0632 | COPPIA STAFFE SOFFITTO INCLIN. LEM/RIO L | i |
Note: The bracket A0632 allows the luminaire to be ceiling mounted without the possibility to rotate it.
To allow free orientation, both accessories (A0651+A0632) must be installed.
Anti-fall safety cable Ø 2 mm for fastening the body to the building structure.
| Code | Description | |
|---|
| A0243 | 15BF galvanized steel cable coil 500m | i |
| A0242 | 15SS galvanized steel cable coil 100m | i |
Note: Coupling accessory A0714 to one of the two safety cables (A0242 or A0243) provides an anti-fall kit fixing and adjusting the cable on the load-bearing element of the building structure.
The cable passes between the two passage holes on the hanging brackets.
Suitable for environments subject to impacts or seismic zones.
Additional bracket that, combined with the A0654 or A0632 accessories, makes it possible for the luminaires to be oriented on the ceiling or the wall, in hot-galvanised steel painted in white polyester.
| Code | Description | |
|---|
| A0651 | SUPP. ROTAZ. COPPIA STAFFE LEM/RIO L | i |
Note: This accessory must ALWAYS be used with one of the following codes: A0632 - A0654.
Brackets for mounting of luminaire on ceiling, stainless steel.
| Code | Description | |
|---|
| A0644 | COPPIA STAFFE SOFFITTO RIO C | i |
A01006 compatible with ON/OFF, SENSEHBZQ e SENSEMBZQ versions, reduces the power line input from ø9-13mm to ø7-9mm. A01007 compatible with EP e D2D versions, increases the power line input from ø9-13mm to ø13-17mm.
| Code | Description | |
|---|
| A01007 | RIDUTTORE PRESSACAVO TECH.M25 13-17mm | i |
| A01006 | RIDUTTORE PRESSACAVO TECH.M20 7-9mm | i |
