Category

Accessories

3F Manta

Pole mount in die-cast aluminium with the same paint treatment as the body (for Ø 60 mm and Ø 76 mm poles) equipped with special teeth for adjusting the inclination on the head of the device by ± 20° with an adjustment pitch of 5°. Possibility of installing on vertical pole (pole head) and horizontal pole (arm). Mounting on the device using the supplied stainless steel screws on self-locking stainless steel nuts.
CA327
CodeDescription
A0439POLE CONNECTION TUBE 60MM
A0440Pole mounting diameter 76mm
Note: Not suitable for fixing on fibreglass pole.
Galvanised steel bracket for fixing on flat facades. Arm length 250 mm, diameter 60 mm, inclination of 15°. This bracket allows adjustment of the inclination of the product.
CA330
CodeDescription
A01479WALL BRACKET 15° DIAM. 60MM
Note: To install this accessory, it is always necessary to use the pole connection code A0439.
Options on request: painting in RAL colours / 500 mm outreach / horizontal pole.
Galvanised steel bracket for fixing on flat facades. 3 mm thick and 200 mm long arm. Powder coated polyester paint, anthracite colour. This bracket DOES NOT allow adjustment of the inclination of the product.
CA331
CodeDescription
A01480Fixed position wall bracket
Note: Options on request: painting in different RAL colour.
Galvanised steel bracket for fixing on the corner between facades. Arm length 250 mm, diameter 60 mm, inclination of 15°. This bracket allows adjustment of the inclination of the product.
CA332
CodeDescription
A01481Corner wall bracket 15° diam 60mm
Note: To install this accessory, it is always necessary to use the pole connection code A0439.
Options on request: painting in RAL colours / 500 mm outreach / horizontal pole.
Reducer in galvanised steel, suitable for poles with a diameter of 76 mm.
CA338
CodeDescription
A0441Reducer from 76 mm to 60 mm
Note: To install this accessory, it is always necessary to use the pole connection code A0439.