Category

Accessories

3F Zeta

Caddy hook to create a point from which to suspend the system or the loads to false ceilings with visible profiles.
CA014
CodeDescription
A02562Caddy for exposed profiles of 24 mm
Note: To be installed on exposed profiles (width 24 mm) of false ceilings.
We recommend reinforcing the false-ceiling fixing at the point where the Caddy is to be installed.
Supplied complete with nut and washer.
The suspension must be purchased separately.
Suspension with regulator, galvanised steel cable 1.5 mm diameter, load 15 kg.
CA034
CodeDescription
A0660Suspension with adjustment - 1m
A0661Suspension with adjustment - 2 m
A0665Suspension with adjustment - 6 m
A0662Suspension with adjustment - 3 m
A0664Suspension with adjustment - 5 m
A0663Suspension with adjustment - 4 m
Note: Attention: each product requires two suspensions with regulator.
Element to connect in hot-galvanised steel.
CA039
CodeDescription
A20433Linear connecting element
Hook to suspended luminaires to a chain.
CA043
CodeDescription
A20452Stainless steel hook for chain
Wall-mounting bracket, in white painted steel.
CA056
CodeDescription
A0052Wall-mounting brack
Galvanised steel cable, diameter 1.5 mm, composed of 49 wires. 15 kg capacity (ratio 5:1).
CA177
CodeDescription
A0717Coil galv. cable diam. 1.5mm - 500m
A0716Coil galv. cable diam. 1.5mm - 100m
A0718Coil galv. cable diam. 1.5mm - 1000m
Note: These accessories must ALWAYS be used with one of the following codes: A20452 ‑ A0714 ‑ A0659.
Clamp in nickel-plated brass suitable for fixing and adjustment of galvanised steel wire (diameter 1,25 mm - 1,5 mm - 2 mm), complete with locking screws. The 2 hole clamp allows to block and adjust the cable on a bearing element (part of the building) or on rounded eye bolt.
CA183
CodeDescription
A0714Clamp 2 holes susp.- 100 pcs
Clamp suitable for fixing and adjustment of galvanised steel wire (diameter 1.5 mm), with quick adjustment through unlock buttons. The clamp with 2 holes allow to fix and adjust the cable on the carrier structural element (belonging to the building) or with eye screw fixing.
CA210
CodeDescription
A0659Adjustable clamp 2 holes - 10 pcs
Note: This accessory can be used with one of the following codes: A0716 ‑ A0717 ‑ A0718.
Safety bracket in white painted steel to secure lighting elements if installed vertically.
CA230
CodeDescription
A20478Anti-slip term. incli. 3F Linux WH
Note: This accessory must ALWAYS be used with code A20448.
Electric supply with white polycarbonate case, internal bracket in galvanised steel.
CA260
CodeDescription
A06795 pole rectangular rose (no cable) WH