3F Linda Hard Skin

Controlled symmetric distribution. Lifetime (L80/B10): 100000 h. (tq+25°C) Photobiological safety RG0 .

Linear anti-sulfur LED modules (SiO2), with special protection against aggressive chemically-volatile substances, for standard LED technology. Colour initial tolerance (MacAdam): SDCM 3.

Body and screen in polycarbonate with additional protective treatment for use in environments with aggressive substances. Ecologic anti-aging injected sealing gasket. Gear-holder reflector in hot-dip galvanised steel, painted with white polyester base. Diffuser in self-extinguishing V2 polycarbonate, photo-engraved interior, UV stabilised, injection moulded with smooth outer surface. Snug fit safety snap-lock clips for diffuser mounting in stainless steel, screwdriver opening. Fixing brackets in stainless steel.

In compliance with EN 60598-1. Compliance with the EN 60598-2-22 standard for power supply from a centralised CPSS emergency system must be verified in the technical data sheets of each individual device on our website.

Dry, dusty indoor environments, subject to occasional water splashes. Suitable product for food production plants (HACCP), IFS (Food), BRC (GSFS Food). Virtually shatterproof polycarbonate compatibly with the fumes / atmospheres that compromise the elasticity of plastic materials. Not suitable for installation on surfaces subject to important vibrations, exposed to weather conditions, on ropes or poles. Luminaire complete with linear anti-sulfur LED modules (SiO2), with special protection against aggressive chemically-volatile substances, for standard LED technology. Body and diffuser resistant to the following substances: Ethyl alcohol (24 hours at 20°C), aqueous detergents, hydrochloric acid (leaves slight mark), DOT4 brake oil, sulphuric acid (leaves slight mark), ammonia. When using this data, remember that it is the result of laboratory tests, and therefore valid only under those test conditions: the data is to be considered approximate and, in the absence of practical experience, it is advisable to carry out tests under actual operating conditions. Temperature and concentration of the chemical agent can affect materials and influence LED technology. Suitable for illumination of public car parks and parking grounds referred to DIN 67528:2018-04. For specific applications please contact our technical offices.

Fixture not suitable for cold stores with an ambient temperature <0°C and/or relative humidity >85%.